Latest Products
-
Drill bit diameter handheld, max ; 80 mm
-
Drill bit diameter with stand, max ; 150 mm
-
Voltage ; 220-240 V
-
Rated input power ; 2.4 kW
-
Drill bit diameter, max ; 250 mm
-
Voltage ; 220-240 V
-
Rated input power : 1.55 kW
-
Drill bit diameter, max : 120 mm
-
Voltage : 220-240 V
-
Drill bit diameter, max
150 mm
-
Travel length, max
The stand is for drilling in roofs, walls and floors.
• The base plate is made of aluminium and is therefore very
light weight. It has a integrated vacuum plate.
• The column can be tilted 0-60°.
• The stand is fitted with a drill motor support.
• Feed lever can be used to loosen/tighten drill motor
clamping, to adjust base plate leveling screws and set
desired column tilt.
Specifications | |
Sensor | Electrochemical, min 5 years life span |
Sampling Method | Diffusion |
Range | 0…100ppm or 0…300ppm |
Accuracy | ±5% FS@25˚C, typical ±10% FS@5~50˚C |
Resolution | 1 ppm |
Repeatability | <±3%FS |
Stability | <±5%/year@0=100ppm, <±10%/year@0=300ppm |
Pressure range | Standard atmospheric pressure ±10% |
Response time (T90) | < 60s |
Warm-up time | < 1 min |
Load Resistance | ≤500Ω(current output), ≥2kΩ(voltage output) |
Power | Current: 18.5~35VDC (RL=500Ω) ; 8.5~35VDC (RL=0Ω) Voltage: 16~28VAC/16~35VDC |
Output | 4~20mA (2 wires), 0-10VDC, RS485 / Modbus |
Working environment | 5~50˚C(continuous), 15~90%RH(Non-cond.) |
Storage temperature | 10…55 ˚C |
Housing | ABS+PC, ULV-0(CMWL) |
Protection | Space mount: IP30 / Wall mount : IP33 |
Weight | Space mount: 163g, Wall mount: 198g |
Specifications | |
Sensor | NDIR sensor, with ABC algorithm* |
Sampling Method | Diffusion |
Accuracy | 50 ppm + 5 % reading & 40 ppm + 3% reading |
Response time | <120s (30cc/min, low airflow) |
Drift | <±10 ppm/year |
Range | 0~2000 ppm (measurement range 400~2000 ppm) |
Output signal | Current: 4…20mA (DC)/ Voltage: 0…10V (DC) |
Communication | RS-485 |
Relay output | 2xSPST, 3A-30VDC/250VAC |
Load resistance | Resistance:≤ 500Ω(current output), ≥2kΩ(Voltage output) |
Power supply | 16…35VDC / 16…28VAC |
Display | Optional LCD,with unit display |
Display resolution | 1ppm |
Working environment | 0…50 ˚C, 0…85 %RH (Non-cond.) |
Storage temperature | -20…60 ˚C |
Housing | ABS+PC (Space mount), fireproof ABS+PC (Duct mount) |
Protection | Space mount: IP30 / Duct mount : IP65 / IP30 (Probe) |
Weight | Space mount: 135g, Duct mount: 240g |
Specifications | |
Medium | Non-combustible, non-corrosive air, insensitive to moisture, dust, condensation & oil |
Working Temp. | -20…70 |
Medium Temp. | 0…60 |
Temp. Compensation | 0…50 |
Working Pressure | Overload 10xFS, burst 15xFS |
Accuracy | ±1.0%FS(±2.0%FS@25Pa range) |
Long term stability | ±0.5%FS/Year |
Thermal effect | <0.05%FS/˚C (zero), <0.08%FS/˚C (FS) |
Response time | 0.5~30s, can be set by keys |
Process Connection | 5mm ID tubing |
Display | 5 digits LCD, display area 44x18mm, with unit indication, field upgradable |
Output | 0~10V,4~20mA (2 wires), RS485 selectable |
Output Load | ≤500Ω (current), ≥2kΩ (voltage) |
Power | Voltage: 16~28VAC/ 16~35VDC Current: 18.5~35VDC (RL=500Ω); 8.5~35VDC (RL=0Ω) |
Units | 5 units, selected by keys (Pa, Kpa, in w.c, mm w.c, mbar) |
Zero set | Easy to reset by external key |
Materials | ABS (housing) & PC (cover) |
Protection | IP54 |
Weight | 165g |
Specifications | |
Media compatibility | Air and non-combustible, compatible gases |
Housing | Die cast aluminum case and bazel, with PC cover |
Protection | IP67 |
Accuracy | ±2%FS(±3% on 125Pa, ±4% on 60Pa) @21˚C |
Pressure Limits | -70 to 100 KPa |
Size | 101.5mm (4") diameter dial face, 115.5mm (4-9/16") dia. Opening for flush mount |
Temperature Limits | -7…60˚C (20…140˚F) |
Process Connection | 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back |
Weight | 440g |
Mounting method | Flush or surface in vertical position |
Accessories | Two 1/8"NPT pipe plugs, two 1/8" NPT to 3/16" rubber tubing adapters and three flush mounting adapters with screws |
Advantages
- The FIS P is the economical solution for anchorings in masonry that do not require approvals.
- The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.
Item No | 0845C90-01 |
Power | 90W |
LED Lamp | 90W LED 3000K-6000K |
Lamp Size | 645*250*65 mm |
Solar Panel | 6V 11.5W, Polycrystalline |
Battery Type | LiFePO4 3.2V 24AH |
Charging time | 6-8 hours |
Discharging time | 30-36 hours |
Lumen | 160lm/w |
Material | ABS |
Install Height | 5-8m |
Warranty | 3years |